Nalazite se na CroRIS probnoj okolini. Ovdje evidentirani podaci neće biti pohranjeni u Informacijskom sustavu znanosti RH. Ako je ovo greška, CroRIS produkcijskoj okolini moguće je pristupi putem poveznice www.croris.hr
izvor podataka: crosbi !

Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis (CROSBI ID 628016)

Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija

Dragičević, Mario ; Jozić, Sonja ; Bajić, Dražen Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis // MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS / Jozić, Sonja ; Lela, Branimir (ur.). Split: Hrvatsko društvo za zaštitu materijala (HDZaMa), 2015. str. 41-46

Podaci o odgovornosti

Dragičević, Mario ; Jozić, Sonja ; Bajić, Dražen

engleski

Optimization of cutting parameters in end-milling of 42CrMo4 steel by applying Taguchi method and the Grey relational analysis

: In this study, Taguchi method is shown in combination with the Grey relational analysis which is applied in cutting parameters optimization during end-milling of 42CrMo4 steel, in order to reach minimum value of surface roughness, and maximum quantity of removed material in unit of time. Parameters which are being optimized are cutting speed (vc), depth of cut (ae), feed rate per tooth (ft) as well as different processing conditions: dry machining, conventional emulsion cooling and cooling by cold compressed air. Based on given input parameters, with the help of Taguchi L9 orthogonal array and Grey relational analysis, optimal combination of cutting parameters by which set requests are being reached is obtained. Furthermore, analysis of variance (ANOVA) is applied for recognition of the most influencing parameters on optimal solution in the process of machining. Taguchi method combined with the Grey relational analysis is satisfactorily used in multiple criteria optimization of end-milling.

Optimization Taguchi method Grey relational analysis ANOVA Milling

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

nije evidentirano

Podaci o prilogu

41-46.

2015.

objavljeno

Podaci o matičnoj publikaciji

MECHANICAL TECHNOLOGIES AND STRUCTURAL MATERIALS

Jozić, Sonja ; Lela, Branimir

Split: Hrvatsko društvo za zaštitu materijala (HDZaMa)

1847-7917

Podaci o skupu

5th International Conference of Mechanical Technologies and Structural Materials

predavanje

24.09.2015-25.09.2015

Split, Hrvatska

Povezanost rada

Strojarstvo