EXPERIMENTAL INVESTIGATION OF SUPER-DUPLEX STAINLESS STEEL TURNING (CROSBI ID 649294)
Prilog sa skupa u zborniku | izvorni znanstveni rad | međunarodna recenzija
Podaci o odgovornosti
Jozić, Sonja ; Bajić, Dražen ; Veić, Mario
engleski
EXPERIMENTAL INVESTIGATION OF SUPER-DUPLEX STAINLESS STEEL TURNING
The purpose of this paper was to investigate of turning process EN 1.4410 super-duplex stainless steel with uncoated carbide inserts. Dry, single-point wet and cooled by compressed cold air longitudinal turning of cylindrical bars tests are conducted. The parametric influences of cutting speed, feed rate, depth of cut and cutting environment on the surface roughness are drawn. Taguchi design of experiment and signal to noise ratio (S/N) were used in analysing the data obtained from experimentation. The main answers were correlated with the cutting parameters and cutting conditions which present a good selection to the best surface roughness generation.
Super duplex stainless steel, turning process, compressed cold air cooling, Taguchi method
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
nije evidentirano
Podaci o prilogu
127-131.
2017.
objavljeno
Podaci o matičnoj publikaciji
COMPUTER INTEGRATED MANUFACTURING AND HIGH SPEED MACHINING
E. Abele, T. Udiljak, D. Ciglar
Zagreb: Hrvatska udruga proizvodnog strojarstva (HUPS)
2584-3214
Podaci o skupu
16th INTERNATIONAL SCIENTIFIC CONFERENCE ON PRODUCTION ENGINEERING
predavanje
08.06.2017-10.06.2017
Zadar, Hrvatska