Hrvatska znanstvena bibliografija (CROSBI)



Pregled bibliografske jedinice broj: 958339

Zbornik radova

Autori: Dumanić, Ivana; Jozić, Sonja; Bajić, Dražen; Sučić, Mihovil
Naslov: Experimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis
( Experimental investigation and multi-objective optimization of controllable parameters in turning process using Taguchi Method and Grey Relational Analysis )
Izvornik: Mechanical Technologies and Structural Materials MTSM2018
Skup: CROATIAN SOCIETY FOR MECHANICAL TECHNOLOGIES
Mjesto i datum: Split, Hrvatska, 27-28.09.2018.
Ključne riječi: Turning, MQL, Compressed cold air cooling, Grey relational analysis, Multi-objective optimization
( Turning, MQL, Compressed cold air cooling, Grey relational analysis, Multi-objective optimization )
Sažetak:
In the present research work investigation of different cutting conditions such as dry machining, minimum quantity lubrication (MQL) and MQL with compressed cold air on average surface roughness, cutting force and material removal rate is presented. Experiments were designed based on three input parameters (cutting speed, feed rate and depth of cut) and three different cutting environments when turning of EN AW-2011 alloy. The Taguchi-based grey relational analysis during longitudinal turning was used to identify the optimal process parameters by which will be achieved minimum surface roughness, minimum cutting force and maximum material removal rate. The results showed that dry machining, high cutting speed, low feed rate and intermediate depth of cut gives the best machining performances.
Rad je indeksiran u
bazama podataka:
Scopus
Vrsta sudjelovanja: Predavanje
Vrsta prezentacije u zborniku: Cjeloviti rad (više od 1500 riječi)
Vrsta recenzije: Međunarodna recenzija
Izvorni jezik: eng
Kategorija: Znanstveni
Znanstvena područja:
Strojarstvo
Upisao u CROSBI: Ivana Dumanić (Ivana.Dumanic.00@fesb.hr), 1. Lis. 2018. u 15:16 sati