crta
Hrvatska znanstvena Sekcija img
bibliografija
3 gif
 Naslovna
 O projektu
 FAQ
 Kontakt
4 gif
Pregledavanje radova
Jednostavno pretraživanje
Napredno pretraživanje
Skupni podaci
Upis novih radova
Upute
Ispravci prijavljenih radova
Ostale bibliografije
Slični projekti
 Bibliografske baze podataka

Pregled bibliografske jedinice broj: 704846

Zbornik radova

Autori: Krvavica, Nino; Travaš, Vanja; Ravlić, Nenad; Ožanić, Nevenka
Naslov: Hydraulics of stratified two-layer flow in Rječina Estuary
( Hydraulics of stratified two-layer flow in Rječina Estuary )
Izvornik: Abstract Proceedings: Landslide and flood hazard assessment / Mihalić Arbanas, Snježana ; Arbanas, Željko (ur.). - Zagreb : Grad zagreb , 2013. 72-72 (ISBN: 978-953-7479-28-2).
Skup: 1st Regional Symposium on Landslides in the Adriatic-Balkan Region with 3rd Workshop of the Japanese-Croatian Project on ‘Risk Identification and Land-Use Planning for Disaster Mitigation of Landslides and Floods in Croatia’
Mjesto i datum: Zagreb, Hrvatska, 6-9.03.2013
Ključne riječi: Stratified flow; two-layer; estuary
( Stratified flow; two-layer; estuary )
Sažetak:
The salinity distributions in the micro-tidal channel of Rječina estuary, in Croatia, are thoroughly studied through intensive sampling campaigns. The salt wedge is developed at the downstream river part, and its length is found to be directly related to Rječina River discharges. The length of the wedge is also dependant, but in smaller intense, to tidal phases. Strong vertical stratification was observed throughout the tidal cycle, proving the limited vertical mixing between salt and freshwater layer. Bottom topography also plays a major role in wedge propagation, especially during small river discharges. A one-dimensional model for two-layer stratified flow, based on Schijf-Schoenfeld model, was developed and used. Results of literature review were confirmed – the interfacial friction factor cannot be satisfactorily correlated neither with Reynolds, Froude nor Keulegan number. The average interfacial factor was found to be best correlated with the number ReRi3, in which Re and Ri are Reynolds and overall Richardson number respectively. Comparison of the modelled and measured shapes of the density interface lines suggests that the interfacial friction factor varies along the wedge and that the use of the length averaged interfacial friction factor is not sufficiently accurate.
Vrsta sudjelovanja: Predavanje
Vrsta prezentacije u zborniku: Sažetak
Vrsta recenzije: Međunarodna recenzija
Projekt / tema: 114-0982709-2549
Izvorni jezik: eng
Kategorija: Znanstveni
Znanstvena područja:
Građevinarstvo
Upisao u CROSBI: Nino Krvavica (nino.krvavica@gradri.hr), 11. Srp. 2014. u 12:15 sati



Verzija za printanje   za tiskati


upomoc
foot_4