crta
Hrvatska znanstvena Sekcija img
bibliografija
3 gif
 Naslovna
 O projektu
 FAQ
 Kontakt
4 gif
Pregledavanje radova
Jednostavno pretraživanje
Napredno pretraživanje
Skupni podaci
Upis novih radova
Upute
Ispravci prijavljenih radova
Ostale bibliografije
Slični projekti
 Bibliografske baze podataka

Pregled bibliografske jedinice broj: 916842

Zbornik radova

Autori: Sokac, Mario; Željko, Santoši; Budak, Igor; Car, Zlatan; Đorđe, Vukelić
Naslov: COMBINATION OF CONTACT AND OPTICAL 3D DIGITIZING METHODS FOR THEIR APPLICATION IN REVERSE ENGINEERING
Izvornik: International Conference on Innovative Technologies, IN-TECH 2017 / Pepelnjak, Tomaž ; Car, Zlatan ; Kudláček, Jan (ur.). - Ljubljana : Jaromer, Czech Republic : Faculty of Engineering, University of Rijeka , 2017. 65-68.
ISSN: 0184-9069
Skup: International Conference on Innovative Technologies, IN-TECH 2017
Mjesto i datum: Slovenia, Ljubljana, 11-13.09.2017.
Ključne riječi: reverse engineering ; 3D digitization ; optical scanner ; contact scanner ; point cloud
Sažetak:
With the development of modern-day 3D digitizing systems, both contact and optical, the field of their implementation drastically expanded. This ensured that different types of 3D digitizing systems have found their place in different areas of science and industry worldwide. But, as their implementation expanded, so did the demand for better and more precise 3D digitizing results of complex parts. In this paper a new approach will be shown where both contact and optical system will be combined in order to exploit their advantages. Those systems are, for optical 3D digitizing systems close-range photogrammetry, and as a contact 3D digitizing system a 3D digitizer (ie. measurement arm). They will be used together in order to fully digitize the object, by exploiting their benefits. In this way advantages of both systems combined together will aid in providing the best possible result. A brief discussion on combination of these systems will be given, and also dimensional analysis will be performed on the 3D digitizing result as a verification measure.
Vrsta sudjelovanja: Predavanje
Vrsta prezentacije u zborniku: Cjeloviti rad (više od 1500 riječi)
Vrsta recenzije: Međunarodna recenzija
Izvorni jezik: ENG
Kategorija: Znanstveni
Znanstvena područja:
Temeljne tehničke znanosti
Upisao u CROSBI: Zlatan Car (zlatan.car@riteh.hr), 8. Sij. 2018. u 09:50 sati



Verzija za printanje   za tiskati


upomoc
foot_4