crta
Hrvatska znanstvena Sekcija img
bibliografija
3 gif
 Naslovna
 O projektu
 FAQ
 Kontakt
4 gif
Pregledavanje radova
Jednostavno pretraživanje
Napredno pretraživanje
Skupni podaci
Upis novih radova
Upute
Ispravci prijavljenih radova
Ostale bibliografije
Slični projekti
 Bibliografske baze podataka

Pregled bibliografske jedinice broj: 204535

Časopis

Autori: Knežević, Alena; Tarle, Zrinka; Negovetić Mandić, Višnja; Pandurić, Vlatko; Prskalo, Katica; Šutalo, Jozo
Naslov: Effectivness of composite polymerization with LEDs of second generation
Izvornik: Journal of dental research (0022-0345) - (2005); 115-116
Vrsta rada: kongresno priopćenje
Ključne riječi: degree of conversion; composite resins; curing lights
Sažetak:
Objectives: The first generation of LED light curing unit (LCU) had a relatively low power output, in contrast to second generation of LEDs which have a greater power output and shorter curing time, but also different spectral distribution. The aim of this study was to compare a degree of conversion (DC) during polymerization of composite resins with two LED LCU of second generation. Methods: For measuring the DC, five samples were prepared for Tetric Ceram (TC)(Vivadent, Schaan, Liechtenstein) and Filtek P60 (P60)(ESPE, Seefeld, Germany) each. Unpolymerized composite sample was placed between two Mylar foils and pressed at 107 Pa to 0.1 mm thickness. For surface DC measurements, light source Bluephase (600 mW/cm2 first 5th sec, 1100 mW/cm2 to the end of illumination) and Bluephase C5 (500 mW/cm2) (both LCU from Vivadent, Schaan, Liechtenstein) were placed on the upper foil of the unpolymerized sample and polymerized (20 sec for TC and P60 with Bluephase, and 40 sec for TC and 20 sec for P60 with Bluephase C5). For measurements at 2 mm depth, overlayers 2 mm thick were made for each material. Light source was placed on the overlayer and polymerized in the same way as when measuring surface conversion. For determining DC, FTIR spectra of polymerized (P) and unpolymerized (U) samples were recorded using Perkin-Elmer Spectrometer (Beaconsfield, Bucks, UK) and calculated according to Rueggebergs formula: % DC = (1-P/U) x 100% Results: The highest DC was reached in case of polymerization with Bluephase for both materials tested on the surface and 2 mm depth. There is no significant difference between polymerization on the surface and 2 mm depth in case of illumination with both LCU, but there is signifficant difference between two tested materials in case of polymerization with both LCU on 2 mm depth. Conclusion: LCU with grater light intensity will enhance better polymerization but the difference in DC between composite materials may be influenced with different concentration of photoinitiators and co-initiators which spectrum lies outside the spectrum emitted from LCU tested.
Projekt / tema: 0065007
Izvorni jezik: ENG
Rad je citiran u
bazama podataka:
Current Contents Citation Index
Web of Science: Science Citation Index Expanded
Scopus
Web of Science: Science Citation
MEDLINE
Kategorija: Znanstveni
Znanstvena područja:
Dentalna medicina
URL cjelovitog teksta:
Google Scholar: Effectivness of composite polymerization with LEDs of second generation



  Verzija za printanje   za tiskati


upomoc
foot_4