Hrvatska znanstvena bibliografija (CROSBI)



Pregled bibliografske jedinice broj: 516702

Zbornik radova

Autori: Baškarić, Tomislav; Damjanović, Darko; Duspara, Miroslav; Kozak, Dražan; Ergić, Todor; Stoić, Antun
Naslov: Analysis of cutting forces in turning of workpiece with a slot
Izvornik: 10th Youth Symposium on Experimental Solid Mechanics / Martin Stockmann, Jens Kretzschmar (ur.). - Chemnitz : Chemnitz University of Technology, Institute of Mechanics and Thermodynamics, Department of Solid Mechanics , 2011. 37-38 (ISBN: 978-3-941003-34-7).
Skup: 10th Youth Symposium on Experimental Solid Mechanics
Mjesto i datum: Chemnitz, Njemačka, 25-28.05.2011.
Ključne riječi: Cutting forces in turning; the workpiece with a rectangular slot; cutting parameters
Sažetak:
Cutting forces in case of turning are analysed in this paper. In the first case, circular workpiece without the slot is analysed. Further, circular workpiece with a square slot is analysed. Obtained measurement results are compared with each other. Following processing parameters were varied: radial depth of cutting, cutting speed and feed rate. Analysis of cutting forces in case of turning the workpiece with a slot is analogous to the cutting forces in milling when the mill is in contact with the workpiece. Based on the measurement results, optimal processing parameters for turning the workpiece with a slot are determined.
Vrsta sudjelovanja: Predavanje
Vrsta prezentacije u zborniku: Cjeloviti rad (više od 1500 riječi)
Vrsta recenzije: Međunarodna recenzija
Projekt / tema: 152-0000000-3309, 152-1201910-1909
Izvorni jezik: ENG
Kategorija: Znanstveni
Znanstvena područja:
Strojarstvo
URL Internet adrese: http://www.qucosa.de/fileadmin/data/qucosa/documents/6788/Proceedings_10th_YSESM_final.pdf
Upisao u CROSBI: ddamjan@sfsb.hr (ddamjan@sfsb.hr), 20. Lip. 2011. u 09:11 sati