crta
Hrvatska znanstvena Sekcija img
bibliografija
3 gif
 Naslovna
 O projektu
 FAQ
 Kontakt
4 gif
Pregledavanje radova
Jednostavno pretraživanje
Napredno pretraživanje
Skupni podaci
Upis novih radova
Upute
Ispravci prijavljenih radova
Ostale bibliografije
Slični projekti
 Bibliografske baze podataka

Pregled bibliografske jedinice broj: 827352

Časopis

Autori: Damjanović, Darko; Kozak, Dražan; Gubeljak, Nenad; Tropša, Vlado
Naslov: Proposal of new Pipe-Ring specimen for fracture mechanics
Izvornik: Procedia Engineering (1877-7058) 149 (2016); 33-39
Vrsta rada: članak
Ključne riječi: residual stress ; pipe ; hoop stress ; incremental hole drilling method ; splitting method ; tensile test ; F - CMOD ; PRS ; PRNB ; SENB
Sažetak:
Thin - walled pipes are not suitable for measuring fracture toughness parameters which are of vital importance in pipes because the crack failure is the most common in pipes. They are not suitable because it is impossible to make standard specimens for measuring the fracture toughness like SENB or CT specimens from the thin wall of the pipe. Lot of researches noticed this problem, but only few are found the good and cheap alternative solution for measuring the fracture toughness. Gubeljak and Matvienko proposed so - called Pipe - Ring specimen (PRS) or Pipe - Ring Notched Bend specimen (PRNB) as alternative solution to the SENB specimen. Until now, only the idealized geometry of PRS specimen is analysed, so specimen which is not cut out from the real pipe but made from plate. On this way, the residual stresses are neglected. The aim of this work is to estimate the hoop residual stresses in the real pipes used in boiler industry, produced by hot - rolling technique, so seamless pipes. These kinds of pipes are delivered only normalized, but not stress relieved too. Therefore, there are surly residual stresses present in pipes which are result of manufacturing technique, but also of uneven cooling after the production process. Within this work, hoop stress as the most relevant for pipes is estimated by two methods: incremental hole drilling method and splitting method. Although residual stresses are cause of collapse of many constructions, still in most cases of analysis and design of individual parts, structures and plants residual stresses are not taken into consideration. Residual stresses surly have some effect on the fatigue behaviour of materials as well as on the fracture toughness of material, therefore it is recommended to take them into account while calculating the lifetime of component or structure.
Projekt / tema: 152-1201910-1909
Izvorni jezik: ENG
Rad je indeksiran u
bazama podataka:
SCI-EXP, SSCI i/ili A&HCI
Kategorija: Znanstveni
Znanstvena područja:
Strojarstvo
Puni text rada: 827352.1-s2.0-S1877705816311341-main.pdf (tekst priložen 15. Srp. 2016. u 07:43 sati)
URL Internet adrese: http://www.sciencedirect.com/science/article/pii/S1877705816311341
http://www.sciencedirect.com/science/article/pii/S1877705816311341
http://apps.webofknowledge.com/Search.do?product=WOS&SID=3AsRgqkENoTrNre8Ewv&search_mode=GeneralSearch&prID=5559eeed-5568-42b2-871f-67e714fe5371
Broj citata:
Altmetric:
DOI: 10.1016/j.proeng.2016.06.635
URL cjelovitog teksta: http://www.sciencedirect.com/science/article/pii/S1877705816311341
Google Scholar: Proposal of new Pipe-Ring specimen for fracture mechanics
Upisao u CROSBI: Darko Damjanović (ddamjan@sfsb.hr), 15. Srp. 2016. u 07:43 sati
Napomene:
Rad je u obliku pozvanog predavanja predstavljen na konferenciji ICMEM 2016. Radovi s navedene konferencije objavljeni su u časopisu Procedia Engineering.



  Verzija za printanje   za tiskati


upomoc
foot_4